LMC, Inc.

335 Wurlitzer Drive
DeKalb, IL 60115 USA
Telephone: (815) 758-3514
Toll Free: (877) 4444-CUT (288)
Fax: (815) 758-3802
E-mail: info@lmcpress.com
Web Site : www.lmcpress.com

Adiabatic High Velocity Cutting, Blanking, Forming
Solid Rounds, Shapes, Tubing

• Capabilities

  • Round Stock: From 030" to 1.00" in diameter. Over 1", request quote.
  • Shaped Stock: Cuts to an equivalent material surface area of 1.00" solid round.
  • Tubing Stock: Cuts to an equivalent material surface are of 1.00" solid round.
  • E-MAT full body "dry" ultra-sonic non destructive tests
  • 3annealing furnaces
  • Low tooling costs

• Materials

  • All Carbon Steel
  • High Speed Steels
  • Alloy Steels
  • Brass
  • Copper
  • Nickel Based Metals
  • Titanium
  • Stainless Steels
  • Special Extruded/Rolled Shapes

• Advantages

  • Clean, Square cuts on all Materials
  • Consistently holds length tolerances to +/- .0015"
  • Straightness Maintained to +/-.005" per foot
  • Maintains Mass/Volume within two tenths of one percent (0.2%)
  • Eliminates Burring
  • Minimizes End Distortion
  • Eliminates End Work Hardening
  • Eliminates End Crack Formations
  • Controlled Angular Variations
  • Minimizes Material Waste
  • Eliminates Cerf

• Equipment

  • Adiabatic Press SIP 15 - Cuts up to 0.0125"
  • Adiabatic Press SIP 25 - Cuts up to 0.250"
  • Adiabatic Press SIP 50 - Cuts up to 0.500"
  • Adiabatic Press SIP 100 - Cuts up to 1.000"