|
•
Capabilities - Hot
- If it
fits in a 7 1/2" circle, minimum quantity is 2000 lbs.
- If it
fits In a 7 1/2" to 13" circle, minimum quantity is 15,000
lbs.
- Hollow
Shapes - minimum ID is 1' for shapes fitting In 7 1/2" circle
or 2" ID on larger circle sizes.
- The
shape must be at least .5 square inches of cross sectional area.
- Nominal
corner radii - carbon .060", stainless .090".
- Nominal
fillets - carbon .188, stainless .313".
- Minimum
thickness of any section is .188"
Hot
finished shapes may be cold worked to achieve smaller dimensions. |
•
Advantages
- Complex
shapes can be extruded in one piece.
- Shorter
lead times.
- No machining
or fabrication may be required.
- If your
prototype part is still in engineering stage and may require design
changes.
- Low
tooling costs.
•
Finishing Equipment
- 500
ton & 150 ton Stretch Straightener
- Saw
Cutting (abrasive & band)
- Detwisting
- Shot
Blasting (ID & OD)
- Process
Anneal Furnace
- Press
Straightener ( Vertical & Horizontal)
- Oiling
- Polishing
Rounds
|
